The Master Cylinder is a component that converts pedal force into hydraulic pressure. It is a component of the clutch release system that delivers the necessary build-up in the hydraulic system. The Master Cylinder is usually mounted to the front bulkhead or to the pedal holder with bolts or a bayonet lock. The Master Cylinder’s piston rod is connected directly to the clutch pedal inside the vehicle. You can get your car’s damaged clutch replaced with new Luk Double clutch complete with all accessories from Sterling Clutch and Brakes (Luk Clutch Dealers in Auckland).

The Clutch Master cylinders of modern times not only carry-out their basic function but a variety of additional tasks as well. Today’s vehicles have cruise control, start inhibitor systems, an electric park brake, torque adaption, and automatic start-stop systems in order to improve safety, comfort, and handling. These additional systems require further reduction in space and weight in order to realize simple and fast installation. You can get all LuK Clutch catalog parts for your vehicle’s clutch repair at Sterling Clutch and Brakes.

The-LuK-Master-Cylinder

Benefits of The Luk Master Cylinders

*  Prevents the noise and vibration from the drive train

*   Long service life

*  Reduces CO2

* Very popular with the vehicle manufacturer. New Passenger car and light commercial vehicle is outfitted with a DMF from Luk every second.

* Luk covers almost the entire Aftermarket with its dual-mass flywheel in OE quality.

Sterling Clutch and brakes are Luk clutch parts and supplier in Auckland. You can call on 09-636-4919 for any further inquiry regarding clutch and brake repairs solutions. You can also visit our website https://Sterlingbrake.co.nz/.  

The main power-transmission element of the clutch, Luk Release Bearing is the connective element between the rotating clutch pressure place on the engine side and the rigid release mechanism on the transmission side. Sterling Clutch and brakes are a leading Luk Clutch Dealers in Auckland and you can visit us for all clutch problems of your car and also get genuine LuK clutch parts for the replacement of your car clutch.

The thrust ball bearings are used to transfer release force to the clutch pressure plate. The release bearing of nowadays is equipped with a radially-moving thrust ring which is held in exact position by a sleeve on the transmission side. This keeps the Release bearing in an optimal central position in relation to the tip of the clutch’s diaphragm spring under all operating conditions. In this way, component wear is minimized.

LuK-Release-Bearing

The one important this here is- always adhere to the defined pre-load applied to the tip of the diaphragm.

Since the release bearing is subjected to a high load and it should always be replaced whenever the clutch is repaired and not reused with new clutch replacement. You can get all LuK Clutch parts for your vehicle’s clutch repair at Sterling Clutch and brakes.

Benefits of Luk Release Bearing

* Maintenance free- bearings are-greased and permanently sealed

* It is of OE quality

* Low noise

*It is Flexible via angular-misalignment compensation.

Sterling Clutch and brakes are Luk clutch kit and parts supplier in Auckland. You can call on 09-636-4919 for any further inquiry regarding clutch and brake repairs solutions. You can also visit our website https://Sterlingbrake.co.nz/ to know all about the services we provide for repair and replacement of the car’s clutch and brakes.