The main power-transmission element of the clutch, Luk Release Bearing is the connective element between the rotating clutch pressure place on the engine side and the rigid release mechanism on the transmission side. Sterling Clutch and brakes are a leading Luk Clutch Dealers in Auckland and you can visit us for all clutch problems of your car and also get genuine LuK clutch parts for the replacement of your car clutch.

The thrust ball bearings are used to transfer release force to the clutch pressure plate. The release bearing of nowadays is equipped with a radially-moving thrust ring which is held in exact position by a sleeve on the transmission side. This keeps the Release bearing in an optimal central position in relation to the tip of the clutch’s diaphragm spring under all operating conditions. In this way, component wear is minimized.

LuK-Release-Bearing

The one important this here is- always adhere to the defined pre-load applied to the tip of the diaphragm.

Since the release bearing is subjected to a high load and it should always be replaced whenever the clutch is repaired and not reused with new clutch replacement. You can get all LuK Clutch parts for your vehicle’s clutch repair at Sterling Clutch and brakes.

Benefits of Luk Release Bearing

* Maintenance free- bearings are-greased and permanently sealed

* It is of OE quality

* Low noise

*It is Flexible via angular-misalignment compensation.

Sterling Clutch and brakes are Luk clutch kit and parts supplier in Auckland. You can call on 09-636-4919 for any further inquiry regarding clutch and brake repairs solutions. You can also visit our website https://Sterlingbrake.co.nz/ to know all about the services we provide for repair and replacement of the car’s clutch and brakes.

The anti-lock braking system, popularly known as ABS system, is a safety system which prevents the wheels on the vehicle locking up in a sudden braking condition due to panic, or if you are driving on a slick and slippery surface. It is a safety anti-skid braking system used in cars, motorcycles, trucks, and buses. ABS operates by preventing the wheels from locking during braking, thereby maintaining tractive contact with the road surface.

Started as one of the safety advancement in the automotive world, Anti-lock Braking System (ABS) has come a long way from being an option to a near necessity. The theory behind the ABS brake is simple. A skidding wheel has less traction than a nonskidding wheel. ABS brakes provide two ways of benefit, stopping is faster and you will be able to steer while stopping.

HOW ABS Brakes Works

There are four main components to an ABS system; the speed sensors, the pump, the valves and the controller. Sensors for sensing the speed are located in each wheel or in the differential, they provide information that the wheel is about to lock up. The valves are located in each line at the brakes and they pass thru, stop the release of brake fluid from the master cylinder to activate the ABS system. The controller is the computer in the car. It watches the speed sensors and the control valves.

https://sterlingbrake.co.nz/wp-content/uploads/2018/08/Antilock-Braking-provide.jpg

When the driver applies the brake, wheel speed sensors determine if one or more wheels are trying to lock up during the braking. If a wheel tries to lock up, a series of hydraulic valves limit or reduce the braking on that wheel. This prevents skidding and allows the driver to maintain steering control. ABS allows the driver to brake and steer at the same time and increases vehicles safety. This is quite different from the traditional brake system. If you ever encounter any problem with brake you can get brake repair service in Auckland from Sterling Clutch and brake Auckland.

Benefits of Antilock Braking System

Anti-lock brakes come as standard fitment in the most modern vehicle- and this is not without reason. In general anti-lock brakes are very advantageous. They help the driver to have more stability on car thereby preventing out of control situations, particularly on the wet and slippery roads. The ABS systems in the car provide the following benefits.

  • Anti-lock braking system (ABS) provides a guarantee of stable braking on all road surfaces, especially on wet and slippery surfaces, hence avoids overturning of the vehicle.
  • ABS helps in reduction of wheels friction on the road, thus increasing the efficiency of tires up to 30%
  • ABS fitted vehicles can be stopped at a lesser distance than a non-ABS vehicle.
  • With ABS steering control is very effective, i.e., the vehicle can be steered smoothly when the brake is applied, thus the chance of an accident is minimized.
  • A driver without experience can drive ABS vehicle effectively, then an experienced driver on the non-ABS vehicle.
  • The value of ABS technology fitted vehicles for resale is more. Since the ABS is standard issue on today’s vehicle, in resale ABS vehicle fetch more value than non-ABS vehicles.
  • ABS fitted vehicles are less involved in the accident, so their insurance costs are reduced over the period.

The advantages of ABS are significant and outweigh any drawbacks. Certain problems like stop time consistency, problems in snow and gravel and replacement cost is much more than the ordinary brake system.  Whatever are the minor drawbacks ABS system is now a standard feature in all new vehicles and most drivers take it for granted?

If you are sure about your car ABS brake maintenance or regular brake maintenance of your vehicle come to Sterling Clutch and Brake Auckland and get brake replacement service in Hamilton or call @ 09 636 4919. You can also get brake pads replacement service in Hamilton. For any query, you can also contact us on http://Sterlingbrake.co.nz.