The Clutch maintenance cost bite the vehicle owners pocket very dearly. Generally the cost of labor in New Zealand costs somewhere between NZ $ 250 plus GST and the parts costs between NZ$300 – 600 depending on the vehicle and make. Moreover it keeps the vehicle owner in a difficult situation as he has to spend a whole day, first taking vehicle to garage and then wait for his turn. Besides financial pains driving with faulty clutch not only endangers the life of vehicle owner and safety of others on road. We now give a checklist of good practice you can partake on how to keep of your vehicle in the best of health and also keep your wallet happy!, and frees you from worries of clutch replacement too soon. If you are NZ and struck up with faulty and worn out clutch and need clutch replacement service in Auckland, you can come to Sterling Clutch and Brake Auckland and avail replacement service of clutch of your vehicle.
The Dos of Clutch Maintenance
Always fully press and release the clutch when change gears and comes to halt. Clutch get mostly damaged when pressed half.
Use the Brake to hold your vehicle stationery on a hill, rather than the clutch.
Always take off in first gear instead of third gear. Taking off in third gear ruins clutch very badly.
Always slowdown well in advance of the stopped traffic on red light. There might be chances that by the time you reach the red light, there is no need to stop as light has already turned green, meaning you can drop the clutch on a ceasing engine and avoid slipping.
Do match the engine speed to the rear-wheel speed when down-shifting. Also, lift the throttle a little bit as the clutch is released, this act of your will make the clutch smoother.
Never ride the Clutch pedal. Usually people ride the clutch while stopping the car on red light, and in high traffic. You seems to feel easy to keep your foot rested on clutch pedal, as you prepare to switch gear after red light. This is a big mistake and bad driving habit. This reduces the pressure between the clutch plate, disk and flywheel and will eventually cause it to brake. Always remember that clutch pedal is for changing gear and not resting your foot.
Never drop the clutch for quick acceleration. The principle of a good clutch management is to shift gears at the optimal RPM and match it. The stress on shock absorption spring aren’t built to handle the type of stress they will face when you slam the clutch plate into a engine already running in full speed.
Never park your vehicle inn the gear. Though this is convenient, but also put undue pressure on the clutch disc, even when the vehicle is not moving. It is better to park car in neutral gear when ever it is possible as it will not stress the clutch plates.
Change gear when there is need for it. Always maintain constant speed in which you feel comfortable that you can handle your vehicle seeing the traffic condition ahead of your vehicle. In this way you can plan in advance when to change the gear in a better way.
The bottom line is that you should use your foot as little as possible on clutch pedal, while shifting gears, starting the vehicle and so on. Put very little pressure on the pedal that is necessary to change gear.
In the end we can say it is cheaper to handle brake replacement vs clutch replacement. So use brake instead of clutch on road to maintain your clutch. As a thumb rule is that there should be balance between the use of brake and clutch.
If you ever face brake problem or need clutch repair service in Auckland come to Sterling Clutch and brake Auckland and for other cities you can call us @09 636 4919 and book your appointment to avoid any delay when you come with your vehicle. When you bring your vehicle to our garage, trained mechanics will first assess the extent of damage to your car clutch and brake and will inform you weather a simple repair will remove fault or any major replacement is needed. With your permission further necessary action will be taken. We always use genuine and original parts, recommended by the vehicle manufacturer of your make and model of your vehicle. You can also contact us on http://Sterlingbrake.co.nz
Your brakes are one of the most critical safety components of your vehicle, and as such, it is very essential that brakes are in perfect working order. Brakes can remain in perfect order only if you get them inspected and repaired by a professional team at the first sign of any trouble. At Sterling clutch and Brake in Auckland, we undertake clutch and brake inspection, repairs and replacement service. By watching out for a few vital signs listed here you can schedule needed repair and replacement of brakes before a brake problem gets out of hand.
Top 4 Signs Your Brake need Repairs
- Unusual and strange Noises: A strange squealing, clicking, or grinding and unusual sound is one of the most common indicator that there is something wrong with your brakes. This is typically an indicator built into your brakes that your brake pads are wearing down and need to be inspected and if needed be replaced. While this may seem likely a relatively minor braking problem, delaying the replacement or repairs of your brake pads could result in damage to the entire brake rotor, resulting in the costly repairs.
- Pulling to one Side: If your vehicle pulls to either the left or right side, then this is another common sign that there is something wrong with your vehicle’s brakes. This turning left or write can be caused by a under pressure in your tire, but this is commonly caused by issues with the brake pads or brake calliper. Repairing this problem sooner rather than later will also help you avoid damage to your car’s steering rack also.
- Bad Vibrations: If your brake pedal or steering wheel excessively vibrates when you put your foot on the brakes, you shouldn’t wait to visit expert mechanic. This could be a sign of warped brake rotor, which could ultimately compromise your car’s braking ability.
- Car takes longer than usual to come to a stop: If you find that your car is taking longer than usual time to stop when you apply brake, it indicates that the brake pads have worn out or some air has been filled in the brake fluid or there is leakage in master cylinder. So if you are in Hamilton and find that your car is not stopping when the brakes are applied then you should go for the inspection of the brake system and get brake replacement service in Hamilton if brake pads are worn out.
For getting complete check up of the brakes and to avail brake repair service in Wellington and getting advice how to maintain your car brake in top condition you can mail your query at http://Sterlingbrake.co.nz/.